Polaris 12mm Toughened Glass Gate Hinge Panel 1700mm W x 1200mm H

Description

The Polaris 12mm Toughened Glass Gate Hinge Panel (1700mm W x 1200mm H) is the engineered companion panel to the Polaris frameless glass gate system. Designed for both DIY pool fencing installations and trade professionals, this hinge panel allows your gate to connect directly to an adjacent glass panel — no separate post or spigot required on the gate side.

What Is a Hinge Panel and Why Do You Need One?

A hinge panel replaces what would otherwise be a standard fence panel beside your gate. Instead of mounting your gate hinges to a post, this panel features two precision-cut apertures on its gate-side edge, allowing Polaris glass-to-glass hinges to pass through and connect your gate directly to the adjacent glass panel. This creates a clean, frameless aesthetic with no visible post at the gate entry point.

This panel is designed exclusively for use with the Polaris Range hinged glass gate and must be paired with the correct Polaris glass-to-glass hinges (sold separately).

Product Specifications

• Panel Width: 1700mm
• Panel Height: 1200mm
• Glass Thickness: 12mm toughened (tempered) safety glass
• Cut-outs: 2 x apertures on gate side for Polaris glass-to-glass hinge attachment
• Hinge Orientation: Left-hand or right-hand (reversible on site)
• Compatible Gate System: Polaris Range Glass Gate
• Pool Compliance: Meets Australian pool fencing compliance standards when installed correctly
• Spigots: Not included — must be purchased separately

Pool Compliance — What You Need to Know

This hinge panel is pool compliant when installed as part of a correctly configured Polaris frameless glass pool fencing system. Australian pool fencing regulations (AS 1926.1) require that all panels, gates, and hardware meet minimum height and non-climbability requirements. This panel at 1200mm height satisfies the minimum effective height requirements when installed with appropriate spigots at the correct depth. Always check your local council requirements before installation, as some states and shires may have additional standards.

Installation Overview for DIY Customers

This panel is suitable for confident DIY installers. The hinge cut-outs are factory-made, meaning no on-site glass modification is required. You will need to:

1. Install spigots (bolt-down or core-drilled) at your desired spacing — spigots are not included and must be purchased separately from our Spigots and Fixings range.
2. Set the hinge panel into position in its spigots, ensuring it is plumb and level.
3. Attach the Polaris glass-to-glass hinges through the cut-outs on the gate side of the panel.
4. Hang the Polaris gate from the hinges and adjust to achieve correct gap clearances and gate swing.
5. Install your latch — sold separately from our Polaris gates and latches range.

If you are unsure which spigots suit your substrate (concrete, timber decking, or pavers), refer to our Spigots and Fixings category or contact us for guidance before ordering.

Tip for DIYers: The hinge orientation on this panel is reversible on site — the same panel works for both left-hand and right-hand gate setups. No special tools are required beyond standard installation equipment.

For Trade Professionals

This panel is supplied in the same commercial-grade specification used by pool fencing contractors across Australia. All glass is manufactured to AS/NZS 2208 and is toughened for safety compliance. Bulk orders and trade accounts are welcome — contact our team for trade pricing and availability.

Frequently Asked Questions

Can I use this panel with a different gate brand?
No. This panel is manufactured specifically for the Polaris Range with Polaris-specific hinge apertures. It is not compatible with other gate systems.

Can I cut this panel to a different height or width?
No. Toughened glass cannot be cut, drilled, or modified after tempering. Ensure this size suits your opening before purchasing.

Are the hinges included?
No. Polaris glass-to-glass hinges are sold separately. Please ensure you order hinges compatible with the Polaris Range.

Are spigots included?
No. Spigots must be purchased separately. Visit our Spigots and Fixings range to select the appropriate spigot type for your substrate.

Is this panel suitable for use as a standard fence panel without a gate?
No. This panel is specifically manufactured with gate-side cut-outs and is designed only for use adjacent to a gate. For standard panels without cut-outs, refer to our standard Polaris frameless glass panel range.

Why Choose Click and Collect Fencing

Click and Collect Fencing is a specialist pool and glass fencing supplier serving DIY customers and trades across Australia. We stock the complete Polaris frameless glass fencing range including panels, gates, hinge panels, spigots, hinges, and latches — meaning you can source your complete kit in one order. Our team is available to assist with product selection, panel sizing, and compliance queries.