Polaris 12mm Toughened Glass Pool Gate 900mm W x 1200mm H – GLASS TO WALL or POST

Description

The Polaris 12mm Toughened Glass Pool Gate (900mm W x 1200mm H — Glass to Wall or Post) is engineered to hinge off a wall or post on the hinge side — ideal for openings without an adjacent glass panel. Manufactured from 12mm toughened safety glass to AS/NZS 2208, this pool-compliant gate delivers a sleek, frameless aesthetic for DIY and trade installations across Australia.

Product Specifications

• Gate Width: 900mm
• Gate Height: 1200mm
• Glass Thickness: 12mm toughened (tempered) safety glass
• Hinge Type: Glass to Wall or Post
• Hinge Orientation: Left-hand or right-hand (reversible on site)
• Compatible Range: Polaris Pool Fencing System
• Pool Compliance: Pool compliant when installed correctly per AS 1926.1
• Hinges/Latch/Spigots: Not included — sold separately

Pool Compliance — What You Need to Know

This pool gate meets Australian pool fencing compliance requirements (AS 1926.1) when correctly installed with appropriate hinges, latch, and spigots. Compliance requires a minimum effective height of 1200mm, non-climbability, and a self-closing, self-latching mechanism. The latch must be positioned to prevent unsupervised access by young children. Always confirm your local council and state requirements before installation, as additional standards may apply.

Installation Guide for DIY Customers

This gate is suitable for confident DIY installers. Key installation steps:

1. Install spigots at the planned gate-side location — bolt-down or core-drilled spigots are sold separately.
2. Install compatible Polaris hinges on the hinge side of the gate and the wall/post bracket.
3. Hang the gate and adjust hinge tension and gate swing clearance.
4. Fit the self-closing latch at the correct height — latch sold separately from our Polaris accessories range.
5. Test the gate for self-closing action and confirm latch engages under all operating conditions.

Tip for DIYers: Before ordering, measure your clear opening width carefully. The gate width refers to the glass panel dimension — allow for hinge and latch hardware clearances. If unsure, contact our team for guidance.

For Trade Professionals

This gate is manufactured to AS/NZS 2208 and meets commercial-grade specifications. Supplied as the glass panel only — hinges, latch, and spigots available separately. Bulk orders and trade accounts available — contact Click and Collect Fencing for trade pricing.

Frequently Asked Questions

Are hinges included?
No. Polaris hinges are sold separately. Select hinges compatible with the Polaris Range and suitable for your hinge configuration (Glass to Wall or Post).

Is the latch included?
No. A pool-compliant self-closing latch must be purchased separately. See our Polaris latches range.

Are spigots included?
No. Spigots must be purchased separately from our Spigots and Fixings range.

Can I modify the gate after purchase?
No. Toughened glass cannot be cut, drilled, or modified after tempering. Confirm the gate width suits your opening before ordering.

What makes a pool gate compliant?
A compliant pool gate must be a minimum of 1200mm high, be self-closing and self-latching, open away from the pool, and have the latch located so young children cannot reach it. Always check your state and council requirements.

Why Choose Click and Collect Fencing

Click and Collect Fencing stocks the complete Polaris pool fencing range including panels, hinge panels, gates, spigots, hinges, and latches. Order your complete gate kit from one supplier and save on freight. Our specialists are available to assist with pool gate sizing, compliance questions, and installation advice for both DIY customers and trade professionals.